Skip to content

相机工具 ​

相机工具用于拍摄静态图像和视频,以及对相机进行配置。

相机捕获和配置选项取决于已连接的相机。配置选项是使用面板装备图标选择的。一个简单的自动化摄像头的配置显示在下面。

当连接到支持MAVLink 相机协议的相机时,您可以另外配置和使用它提供的其他相机服务。例如,如果您的摄像头支持视频模式,您将能够在仍然存在的图像捕获和视频模式之间切换,并且开始/停止录制。

::: 信息 所显示的大多数设置都依赖摄像头(它们是在 MAVLink 相机定义文件 中定义的)。

A few common settings at the end are hard-coded: Photo Mode (Single/Time Lapse), Photo Interval (if Time Lapse), Reset Camera Defaults (sends a reset command to the camera), Format (storage), and for a camera with a video stream, Grid Lines, Telemetry Overlay and Display Fit (under Video Display) :::

视频流 ​

视频页面用于启用/禁用视频流。 When enabled, you can start/stop the video stream, enable a grid overlay or the live telemetry overlay, change how the image fits the screen, and record the video locally with QGC.

A single photo the camera can't take itself (it can't capture images, or not in video mode) is saved by QGC instead, from the video on display, to the Photo folder of the Application Load/Save Path. The JPEG records when it was taken and where the vehicle was (EXIF date and GPS position).